ELMARK 99LED990D/IP20 TUYA DIGITÁLIS LED SZALAG RGBCCT+IC IP20 2X5M, SZETT

<p>The main benefit comparing to analog LED strips is that you can control every section of LEDs, separately. Traditionally, it is achieved thanks to additional chips (IC) assembled directly inside the <br />LED diode or on the digital strip board.<br />Each group of LEDs has an integrated circuit chip, and this integrated circuit chip controls the change of color and brightness of this group of LEDs. When switching the power, the current passed through the LEDs, causing LEDs to light up at their default settings.<br />To create an effect, you need to enter a command on the controller.<br />Technical data: <br />• Type: Digital RGBCCT+IC LED strip<br />• Input voltage: 220-240V<br />• LED Driver and strip voltage: 24V DC<br />• Colour temperature: RGB+ adjustabe white <br />colour<br />• White colour lumens: 68lm/W<br />• LED chip: SMD 2835<br />• LED QTY: <br />RGB: 30LED/m<br />3000K: 30LED/m<br />6500: 30LED/m<br />• Beam angle: 120°<br />• CRI>80<br />• LED strip length: 2x5m<br />• PCB board: 12mm double<br />• IP code of LED strip: IP20</p><p>The main benefit comparing to analog LED strips is that you can control every section of LEDs, separately. Traditionally, it is achieved thanks to additional chips (IC) assembled directly inside the <br />LED diode or on the digital strip board.<br />Each group of LEDs has an integrated circuit chip, and this integrated circuit chip controls the change of color and brightness of this group of LEDs. When switching the power, the current passed through the LEDs, causing LEDs to light up at their default settings.<br />To create an effect, you need to enter a command on the controller.<br />Technical data: <br />• Type: Digital RGBCCT+IC LED strip<br />• Input voltage: 220-240V<br />• LED Driver and strip voltage: 24V DC<br />• Colour temperature: RGB+ adjustabe white <br />colour<br />• White colour lumens: 68lm/W<br />• LED chip: SMD 2835<br />• LED QTY: <br />RGB: 30LED/m<br />3000K: 30LED/m<br />6500: 30LED/m<br />• Beam angle: 120°<br />• CRI>80<br />• LED strip length: 2x5m<br />• PCB board: 12mm double<br />• IP code of LED strip: IP20</p><p>The main benefit comparing to analog LED strips is that you can control every section of LEDs, separately. Traditionally, it is achieved thanks to additional chips (IC) assembled directly inside the <br />LED diode or on the digital strip board.<br />Each group of LEDs has an integrated circuit chip, and this integrated circuit chip controls the change of color and brightness of this group of LEDs. When switching the power, the current passed through the LEDs, causing LEDs to light up at their default settings.<br />To create an effect, you need to enter a command on the controller.<br />Technical data: <br />• Type: Digital RGBCCT+IC LED strip<br />• Input voltage: 220-240V<br />• LED Driver and strip voltage: 24V DC<br />• Colour temperature: RGB+ adjustabe white <br />colour<br />• White colour lumens: 68lm/W<br />• LED chip: SMD 2835<br />• LED QTY: <br />RGB: 30LED/m<br />3000K: 30LED/m<br />6500: 30LED/m<br />• Beam angle: 120°<br />• CRI>80<br />• LED strip length: 2x5m<br />• PCB board: 12mm double<br />• IP code of LED strip: IP20</p><p>The main benefit comparing to analog LED strips is that you can control every section of LEDs, separately. Traditionally, it is achieved thanks to additional chips (IC) assembled directly inside the <br />LED diode or on the digital strip board.<br />Each group of LEDs has an integrated circuit chip, and this integrated circuit chip controls the change of color and brightness of this group of LEDs. When switching the power, the current passed through the LEDs, causing LEDs to light up at their default settings.<br />To create an effect, you need to enter a command on the controller.<br />Technical data: <br />• Type: Digital RGBCCT+IC LED strip<br />• Input voltage: 220-240V<br />• LED Driver and strip voltage: 24V DC<br />• Colour temperature: RGB+ adjustabe white <br />colour<br />• White colour lumens: 68lm/W<br />• LED chip: SMD 2835<br />• LED QTY: <br />RGB: 30LED/m<br />3000K: 30LED/m<br />6500: 30LED/m<br />• Beam angle: 120°<br />• CRI>80<br />• LED strip length: 2x5m<br />• PCB board: 12mm double<br />• IP code of LED strip: IP20</p><p>The main benefit comparing to analog LED strips is that you can control every section of LEDs, separately. Traditionally, it is achieved thanks to additional chips (IC) assembled directly inside the <br />LED diode or on the digital strip board.<br />Each group of LEDs has an integrated circuit chip, and this integrated circuit chip controls the change of color and brightness of this group of LEDs. When switching the power, the current passed through the LEDs, causing LEDs to light up at their default settings.<br />To create an effect, you need to enter a command on the controller.<br />Technical data: <br />• Type: Digital RGBCCT+IC LED strip<br />• Input voltage: 220-240V<br />• LED Driver and strip voltage: 24V DC<br />• Colour temperature: RGB+ adjustabe white <br />colour<br />• White colour lumens: 68lm/W<br />• LED chip: SMD 2835<br />• LED QTY: <br />RGB: 30LED/m<br />3000K: 30LED/m<br />6500: 30LED/m<br />• Beam angle: 120°<br />• CRI>80<br />• LED strip length: 2x5m<br />• PCB board: 12mm double<br />• IP code of LED strip: IP20</p><p>The main benefit comparing to analog LED strips is that you can control every section of LEDs, separately. Traditionally, it is achieved thanks to additional chips (IC) assembled directly inside the <br />LED diode or on the digital strip board.<br />Each group of LEDs has an integrated circuit chip, and this integrated circuit chip controls the change of color and brightness of this group of LEDs. When switching the power, the current passed through the LEDs, causing LEDs to light up at their default settings.<br />To create an effect, you need to enter a command on the controller.<br />Technical data: <br />• Type: Digital RGBCCT+IC LED strip<br />• Input voltage: 220-240V<br />• LED Driver and strip voltage: 24V DC<br />• Colour temperature: RGB+ adjustabe white <br />colour<br />• White colour lumens: 68lm/W<br />• LED chip: SMD 2835<br />• LED QTY: <br />RGB: 30LED/m<br />3000K: 30LED/m<br />6500: 30LED/m<br />• Beam angle: 120°<br />• CRI>80<br />• LED strip length: 2x5m<br />• PCB board: 12mm double<br />• IP code of LED strip: IP20</p><p>The main benefit comparing to analog LED strips is that you can control every section of LEDs, separately. Traditionally, it is achieved thanks to additional chips (IC) assembled directly inside the <br />LED diode or on the digital strip board.<br />Each group of LEDs has an integrated circuit chip, and this integrated circuit chip controls the change of color and brightness of this group of LEDs. When switching the power, the current passed through the LEDs, causing LEDs to light up at their default settings.<br />To create an effect, you need to enter a command on the controller.<br />Technical data: <br />• Type: Digital RGBCCT+IC LED strip<br />• Input voltage: 220-240V<br />• LED Driver and strip voltage: 24V DC<br />• Colour temperature: RGB+ adjustabe white <br />colour<br />• White colour lumens: 68lm/W<br />• LED chip: SMD 2835<br />• LED QTY: <br />RGB: 30LED/m<br />3000K: 30LED/m<br />6500: 30LED/m<br />• Beam angle: 120°<br />• CRI>80<br />• LED strip length: 2x5m<br />• PCB board: 12mm double<br />• IP code of LED strip: IP20</p><p>The main benefit comparing to analog LED strips is that you can control every section of LEDs, separately. Traditionally, it is achieved thanks to additional chips (IC) assembled directly inside the <br />LED diode or on the digital strip board.<br />Each group of LEDs has an integrated circuit chip, and this integrated circuit chip controls the change of color and brightness of this group of LEDs. When switching the power, the current passed through the LEDs, causing LEDs to light up at their default settings.<br />To create an effect, you need to enter a command on the controller.<br />Technical data: <br />• Type: Digital RGBCCT+IC LED strip<br />• Input voltage: 220-240V<br />• LED Driver and strip voltage: 24V DC<br />• Colour temperature: RGB+ adjustabe white <br />colour<br />• White colour lumens: 68lm/W<br />• LED chip: SMD 2835<br />• LED QTY: <br />RGB: 30LED/m<br />3000K: 30LED/m<br />6500: 30LED/m<br />• Beam angle: 120°<br />• CRI>80<br />• LED strip length: 2x5m<br />• PCB board: 12mm double<br />• IP code of LED strip: IP20</p><p>The main benefit comparing to analog LED strips is that you can control every section of LEDs, separately. Traditionally, it is achieved thanks to additional chips (IC) assembled directly inside the <br />LED diode or on the digital strip board.<br />Each group of LEDs has an integrated circuit chip, and this integrated circuit chip controls the change of color and brightness of this group of LEDs. When switching the power, the current passed through the LEDs, causing LEDs to light up at their default settings.<br />To create an effect, you need to enter a command on the controller.<br />Technical data: <br />• Type: Digital RGBCCT+IC LED strip<br />• Input voltage: 220-240V<br />• LED Driver and strip voltage: 24V DC<br />• Colour temperature: RGB+ adjustabe white <br />colour<br />• White colour lumens: 68lm/W<br />• LED chip: SMD 2835<br />• LED QTY: <br />RGB: 30LED/m<br />3000K: 30LED/m<br />6500: 30LED/m<br />• Beam angle: 120°<br />• CRI>80<br />• LED strip length: 2x5m<br />• PCB board: 12mm double<br />• IP code of LED strip: IP20</p><p>The main benefit comparing to analog LED strips is that you can control every section of LEDs, separately. Traditionally, it is achieved thanks to additional chips (IC) assembled directly inside the <br />LED diode or on the digital strip board.<br />Each group of LEDs has an integrated circuit chip, and this integrated circuit chip controls the change of color and brightness of this group of LEDs. When switching the power, the current passed through the LEDs, causing LEDs to light up at their default settings.<br />To create an effect, you need to enter a command on the controller.<br />Technical data: <br />• Type: Digital RGBCCT+IC LED strip<br />• Input voltage: 220-240V<br />• LED Driver and strip voltage: 24V DC<br />• Colour temperature: RGB+ adjustabe white <br />colour<br />• White colour lumens: 68lm/W<br />• LED chip: SMD 2835<br />• LED QTY: <br />RGB: 30LED/m<br />3000K: 30LED/m<br />6500: 30LED/m<br />• Beam angle: 120°<br />• CRI>80<br />• LED strip length: 2x5m<br />• PCB board: 12mm double<br />• IP code of LED strip: IP20</p><p>The main benefit comparing to analog LED strips is that you can control every section of LEDs, separately. Traditionally, it is achieved thanks to additional chips (IC) assembled directly inside the <br />LED diode or on the digital strip board.<br />Each group of LEDs has an integrated circuit chip, and this integrated circuit chip controls the change of color and brightness of this group of LEDs. When switching the power, the current passed through the LEDs, causing LEDs to light up at their default settings.<br />To create an effect, you need to enter a command on the controller.<br />Technical data: <br />• Type: Digital RGBCCT+IC LED strip<br />• Input voltage: 220-240V<br />• LED Driver and strip voltage: 24V DC<br />• Colour temperature: RGB+ adjustabe white <br />colour<br />• White colour lumens: 68lm/W<br />• LED chip: SMD 2835<br />• LED QTY: <br />RGB: 30LED/m<br />3000K: 30LED/m<br />6500: 30LED/m<br />• Beam angle: 120°<br />• CRI>80<br />• LED strip length: 2x5m<br />• PCB board: 12mm double<br />• IP code of LED strip: IP20</p><p>The main benefit comparing to analog LED strips is that you can control every section of LEDs, separately. Traditionally, it is achieved thanks to additional chips (IC) assembled directly inside the <br />LED diode or on the digital strip board.<br />Each group of LEDs has an integrated circuit chip, and this integrated circuit chip controls the change of color and brightness of this group of LEDs. When switching the power, the current passed through the LEDs, causing LEDs to light up at their default settings.<br />To create an effect, you need to enter a command on the controller.<br />Technical data: <br />• Type: Digital RGBCCT+IC LED strip<br />• Input voltage: 220-240V<br />• LED Driver and strip voltage: 24V DC<br />• Colour temperature: RGB+ adjustabe white <br />colour<br />• White colour lumens: 68lm/W<br />• LED chip: SMD 2835<br />• LED QTY: <br />RGB: 30LED/m<br />3000K: 30LED/m<br />6500: 30LED/m<br />• Beam angle: 120°<br />• CRI>80<br />• LED strip length: 2x5m<br />• PCB board: 12mm double<br />• IP code of LED strip: IP20</p><p>The main benefit comparing to analog LED strips is that you can control every section of LEDs, separately. Traditionally, it is achieved thanks to additional chips (IC) assembled directly inside the <br />LED diode or on the digital strip board.<br />Each group of LEDs has an integrated circuit chip, and this integrated circuit chip controls the change of color and brightness of this group of LEDs. When switching the power, the current passed through the LEDs, causing LEDs to light up at their default settings.<br />To create an effect, you need to enter a command on the controller.<br />Technical data: <br />• Type: Digital RGBCCT+IC LED strip<br />• Input voltage: 220-240V<br />• LED Driver and strip voltage: 24V DC<br />• Colour temperature: RGB+ adjustabe white <br />colour<br />• White colour lumens: 68lm/W<br />• LED chip: SMD 2835<br />• LED QTY: <br />RGB: 30LED/m<br />3000K: 30LED/m<br />6500: 30LED/m<br />• Beam angle: 120°<br />• CRI>80<br />• LED strip length: 2x5m<br />• PCB board: 12mm double<br />• IP code of LED strip: IP20</p><p>The main benefit comparing to analog LED strips is that you can control every section of LEDs, separately. Traditionally, it is achieved thanks to additional chips (IC) assembled directly inside the <br />LED diode or on the digital strip board.<br />Each group of LEDs has an integrated circuit chip, and this integrated circuit chip controls the change of color and brightness of this group of LEDs. When switching the power, the current passed through the LEDs, causing LEDs to light up at their default settings.<br />To create an effect, you need to enter a command on the controller.<br />Technical data: <br />• Type: Digital RGBCCT+IC LED strip<br />• Input voltage: 220-240V<br />• LED Driver and strip voltage: 24V DC<br />• Colour temperature: RGB+ adjustabe white <br />colour<br />• White colour lumens: 68lm/W<br />• LED chip: SMD 2835<br />• LED QTY: <br />RGB: 30LED/m<br />3000K: 30LED/m<br />6500: 30LED/m<br />• Beam angle: 120°<br />• CRI>80<br />• LED strip length: 2x5m<br />• PCB board: 12mm double<br />• IP code of LED strip: IP20</p><p>The main benefit comparing to analog LED strips is that you can control every section of LEDs, separately. Traditionally, it is achieved thanks to additional chips (IC) assembled directly inside the <br />LED diode or on the digital strip board.<br />Each group of LEDs has an integrated circuit chip, and this integrated circuit chip controls the change of color and brightness of this group of LEDs. When switching the power, the current passed through the LEDs, causing LEDs to light up at their default settings.<br />To create an effect, you need to enter a command on the controller.<br />Technical data: <br />• Type: Digital RGBCCT+IC LED strip<br />• Input voltage: 220-240V<br />• LED Driver and strip voltage: 24V DC<br />• Colour temperature: RGB+ adjustabe white <br />colour<br />• White colour lumens: 68lm/W<br />• LED chip: SMD 2835<br />• LED QTY: <br />RGB: 30LED/m<br />3000K: 30LED/m<br />6500: 30LED/m<br />• Beam angle: 120°<br />• CRI>80<br />• LED strip length: 2x5m<br />• PCB board: 12mm double<br />• IP code of LED strip: IP20</p><p>The main benefit comparing to analog LED strips is that you can control every section of LEDs, separately. Traditionally, it is achieved thanks to additional chips (IC) assembled directly inside the <br />LED diode or on the digital strip board.<br />Each group of LEDs has an integrated circuit chip, and this integrated circuit chip controls the change of color and brightness of this group of LEDs. When switching the power, the current passed through the LEDs, causing LEDs to light up at their default settings.<br />To create an effect, you need to enter a command on the controller.<br />Technical data: <br />• Type: Digital RGBCCT+IC LED strip<br />• Input voltage: 220-240V<br />• LED Driver and strip voltage: 24V DC<br />• Colour temperature: RGB+ adjustabe white <br />colour<br />• White colour lumens: 68lm/W<br />• LED chip: SMD 2835<br />• LED QTY: <br />RGB: 30LED/m<br />3000K: 30LED/m<br />6500: 30LED/m<br />• Beam angle: 120°<br />• CRI>80<br />• LED strip length: 2x5m<br />• PCB board: 12mm double<br />• IP code of LED strip: IP20</p><p>The main benefit comparing to analog LED strips is that you can control every section of LEDs, separately. Traditionally, it is achieved thanks to additional chips (IC) assembled directly inside the <br />LED diode or on the digital strip board.<br />Each group of LEDs has an integrated circuit chip, and this integrated circuit chip controls the change of color and brightness of this group of LEDs. When switching the power, the current passed through the LEDs, causing LEDs to light up at their default settings.<br />To create an effect, you need to enter a command on the controller.<br />Technical data: <br />• Type: Digital RGBCCT+IC LED strip<br />• Input voltage: 220-240V<br />• LED Driver and strip voltage: 24V DC<br />• Colour temperature: RGB+ adjustabe white <br />colour<br />• White colour lumens: 68lm/W<br />• LED chip: SMD 2835<br />• LED QTY: <br />RGB: 30LED/m<br />3000K: 30LED/m<br />6500: 30LED/m<br />• Beam angle: 120°<br />• CRI>80<br />• LED strip length: 2x5m<br />• PCB board: 12mm double<br />• IP code of LED strip: IP20</p>