0
0 Ft
Termékeink

Ne dobja ki!


Az elhasználódott fényforrások veszélyes hulladéknak minősülnek, melyek újrahasznosításával sokat tehetünk környezetünkért.

Hozza be hozzánk működésképtelen izzóit és vásároljon tőlünk egy újat.

AKKUS LED LÁMPA

Munkalámpa

Munkalámpa és powerbank 

Ablaktisztító robot

- Két korongos
- 3 takarítási mód
- 80W teljesítmény

PV21

TOP termékek
Utoljára megnézett
Termékajánló
Termék részletek
Főkategória >Ipari kapcsolók >Kontaktorok és kiegészítőik >Elmark kontaktorok és kiegészítőik
 
 

ELMARK Hkioldó LT1-D40 - LT1-D95 típusú kontaktorokhoz, 80-93A

ELMARK Hkioldó LT1-D40 - LT1-D95 típusú kontaktorokhoz, 80-93A
Energiaosztály 2023-
Listaár: 12 917 Ft 
7 751 Ft
Díjmentes szállítás!
db Kosárba Kosárba
RAKTÁRKÉSZLET FEJLESZTÉS ALATT

 

ELMARK elektronikai katalógus 2026 1.rész

 

ELMARK elektronikai katalógus 2026 2.rész

 

ELMARK világítástechnikai katalógus 2026 1.rész

 

ELMARK világítástechnikai katalógus 2026 2.rész

 

ELMARK elektronikai katalógus 2025

 

ELMARK világítástechnikai katalógus 2025

 

- A kép illusztráció!

 

ELMARK elektronikai katalógus


ELMARK világítástechnikai katalógus


ELMARK 13365 általános leírása:

Az ipari kapcsolók nélkülözhetetlen elemei a modern gyártási folyamatoknak és automatizálási rendszereknek. Ezek a mechanikus vagy elektronikus eszközök feladata, hogy vezéreljék az elektromos áramot különböző berendezésekben és gépekben.

 

Az ipari kapcsolók széles választékban kaphatók, és számos különböző típusuk létezik. A leggyakoribb típusok közé tartoznak:
* Motorkapcsolók: Speciálisan motorok indítására és leállítására tervezett kapcsolók.
* Teljesítménykapcsolók: Nagy teljesítményű áramkörök kapcsolására szolgálnak.
* Biztonsági kapcsolók: Biztonsági funkciókat látnak el, például vészleállítást vagy ajtózárást vezérelnek.
* Hőmérséklet-kapcsolók: Hőmérsékletváltozás hatására kapcsolnak.
* Szintkapcsolók: Folyadékszint vagy szilárd anyagok szintjének érzékelésére és kapcsolásra szolgálnak.
* Nyomáskapcsolók: Nyomásváltozás hatására kapcsolnak.

 

Az ipari kapcsolók jellemzői
* Kapcsolási teljesítmény: Az a maximális áram, amelyet a kapcsoló képes megszakítani.
* Kapcsolási feszültség: A maximális feszültség, amelyet a kapcsoló képes kezelni.
* Élettartam: A kapcsoló működési ciklusainak száma meghibásodásig.
* Védettség: A kapcsoló védettsége a környezeti hatásokkal szemben (por, nedvesség, ütések).
* Kapcsolat típusa: Normál nyitott vagy normál zárt kapcsolat.
* Működtetési mód: Kézi, automatikus vagy távvezérlésű.

 

Az ipari kapcsolók felhasználási területei
Az ipari kapcsolók széles körben alkalmazhatók különböző iparágakban, például:
* Gyártás: Gépek, berendezések vezérlése, automatizálás.
* Energetika: Áram elosztása, védelem.
* Épületgépészet: Fűtés, szellőzés, légkondicionálás.
* Automatizálás: Robotika, PLC-k.

 

Egyéb információk
* Anyagok: Az ipari kapcsolók általában fémötvözetekből, műanyagokból és kerámiákból készülnek.
* Szerelés: Az ipari kapcsolók különböző szerelési módokkal rendelkezhetnek (panelre szerelhető, DIN sínre szerelhető stb.).
* Biztonság: Az ipari kapcsolók kiválasztásakor kiemelt figyelmet kell fordítani a biztonságra. A megfelelő védettségű és minősített kapcsolókat kell választani.
* Karbantartás: Az ipari kapcsolókat rendszeresen ellenőrizni és karbantartani kell ajánlott 8-10 évente cserélni.

További információért keressen minket bizalommal: info@gazdafielectronic.hu
Részletek Kiegészítő termékek Adatok Vélemények
  • <p><strong>Technical characteristics of LT2-E:</strong><br />- Rated operating current: 0,10 up to 93А<br />- Rated operating voltage : up to 690V АС;50/60Hz<br />- Insulation voltage: >690V<br />- Impulse voltage withstand: 6000V<br />- Mechanical wear resistance (number of cycles): ≥10000000<br />- Electrical wear resistance (number of cycles): ≥1000000<br />- Ambient temperature: -10° to 65ºС<br />- Maximum altitude: up to 2000m</p>n<p><strong>Advantages:</strong><br />- Indication for protection activating<br />- Choice of protection restoration method<br />- Allows adjustment of the operation range<br />- Allows operation at higher frequency<br />- High reliability of the current parameters<br />- Increase the effectiveness and prolongs the term of operation.</p>n<p><strong>Functions:</strong><br />- For protection of induction motors from overload or overheat<br />- To prevent the motor from operation at unusual temperature conditions</p>n<p><strong>Applications:</strong><br />- Industry <br />- Building construction</p>n<p><br /><strong>Моunting:</strong> To the terminals of the contactor and it is additionally clamped to its frame through a pin</p>n<p><strong>Standard:</strong> EN60947-1; EN60947-4-1; LVD; EMC</p><p><strong>Technical characteristics of LT2-E:</strong><br />- Rated operating current: 0,10 up to 93А<br />- Rated operating voltage : up to 690V АС;50/60Hz<br />- Insulation voltage: >690V<br />- Impulse voltage withstand: 6000V<br />- Mechanical wear resistance (number of cycles): ≥10000000<br />- Electrical wear resistance (number of cycles): ≥1000000<br />- Ambient temperature: -10° to 65ºС<br />- Maximum altitude: up to 2000m</p>n<p><strong>Advantages:</strong><br />- Indication for protection activating<br />- Choice of protection restoration method<br />- Allows adjustment of the operation range<br />- Allows operation at higher frequency<br />- High reliability of the current parameters<br />- Increase the effectiveness and prolongs the term of operation.</p>n<p><strong>Functions:</strong><br />- For protection of induction motors from overload or overheat<br />- To prevent the motor from operation at unusual temperature conditions</p>n<p><strong>Applications:</strong><br />- Industry <br />- Building construction</p>n<p><br /><strong>Моunting:</strong> To the terminals of the contactor and it is additionally clamped to its frame through a pin</p>n<p><strong>Standard:</strong> EN60947-1; EN60947-4-1; LVD; EMC</p><p><strong>Technical characteristics of LT2-E:</strong><br />- Rated operating current: 0,10 up to 93А<br />- Rated operating voltage : up to 690V АС;50/60Hz<br />- Insulation voltage: >690V<br />- Impulse voltage withstand: 6000V<br />- Mechanical wear resistance (number of cycles): ≥10000000<br />- Electrical wear resistance (number of cycles): ≥1000000<br />- Ambient temperature: -10° to 65ºС<br />- Maximum altitude: up to 2000m</p>n<p><strong>Advantages:</strong><br />- Indication for protection activating<br />- Choice of protection restoration method<br />- Allows adjustment of the operation range<br />- Allows operation at higher frequency<br />- High reliability of the current parameters<br />- Increase the effectiveness and prolongs the term of operation.</p>n<p><strong>Functions:</strong><br />- For protection of induction motors from overload or overheat<br />- To prevent the motor from operation at unusual temperature conditions</p>n<p><strong>Applications:</strong><br />- Industry <br />- Building construction</p>n<p><br /><strong>Моunting:</strong> To the terminals of the contactor and it is additionally clamped to its frame through a pin</p>n<p><strong>Standard:</strong> EN60947-1; EN60947-4-1; LVD; EMC</p><p><strong>Technical characteristics of LT2-E:</strong><br />- Rated operating current: 0,10 up to 93А<br />- Rated operating voltage : up to 690V АС;50/60Hz<br />- Insulation voltage: >690V<br />- Impulse voltage withstand: 6000V<br />- Mechanical wear resistance (number of cycles): ≥10000000<br />- Electrical wear resistance (number of cycles): ≥1000000<br />- Ambient temperature: -10° to 65ºС<br />- Maximum altitude: up to 2000m</p>n<p><strong>Advantages:</strong><br />- Indication for protection activating<br />- Choice of protection restoration method<br />- Allows adjustment of the operation range<br />- Allows operation at higher frequency<br />- High reliability of the current parameters<br />- Increase the effectiveness and prolongs the term of operation.</p>n<p><strong>Functions:</strong><br />- For protection of induction motors from overload or overheat<br />- To prevent the motor from operation at unusual temperature conditions</p>n<p><strong>Applications:</strong><br />- Industry <br />- Building construction</p>n<p><br /><strong>Моunting:</strong> To the terminals of the contactor and it is additionally clamped to its frame through a pin</p>n<p><strong>Standard:</strong> EN60947-1; EN60947-4-1; LVD; EMC</p><p><strong>Technical characteristics of LT2-E:</strong><br />- Rated operating current: 0,10 up to 93А<br />- Rated operating voltage : up to 690V АС;50/60Hz<br />- Insulation voltage: >690V<br />- Impulse voltage withstand: 6000V<br />- Mechanical wear resistance (number of cycles): ≥10000000<br />- Electrical wear resistance (number of cycles): ≥1000000<br />- Ambient temperature: -10° to 65ºС<br />- Maximum altitude: up to 2000m</p>n<p><strong>Advantages:</strong><br />- Indication for protection activating<br />- Choice of protection restoration method<br />- Allows adjustment of the operation range<br />- Allows operation at higher frequency<br />- High reliability of the current parameters<br />- Increase the effectiveness and prolongs the term of operation.</p>n<p><strong>Functions:</strong><br />- For protection of induction motors from overload or overheat<br />- To prevent the motor from operation at unusual temperature conditions</p>n<p><strong>Applications:</strong><br />- Industry <br />- Building construction</p>n<p><br /><strong>Моunting:</strong> To the terminals of the contactor and it is additionally clamped to its frame through a pin</p>n<p><strong>Standard:</strong> EN60947-1; EN60947-4-1; LVD; EMC</p><p><strong>Technical characteristics of LT2-E:</strong><br />- Rated operating current: 0,10 up to 93А<br />- Rated operating voltage : up to 690V АС;50/60Hz<br />- Insulation voltage: >690V<br />- Impulse voltage withstand: 6000V<br />- Mechanical wear resistance (number of cycles): ≥10000000<br />- Electrical wear resistance (number of cycles): ≥1000000<br />- Ambient temperature: -10° to 65ºС<br />- Maximum altitude: up to 2000m</p>n<p><strong>Advantages:</strong><br />- Indication for protection activating<br />- Choice of protection restoration method<br />- Allows adjustment of the operation range<br />- Allows operation at higher frequency<br />- High reliability of the current parameters<br />- Increase the effectiveness and prolongs the term of operation.</p>n<p><strong>Functions:</strong><br />- For protection of induction motors from overload or overheat<br />- To prevent the motor from operation at unusual temperature conditions</p>n<p><strong>Applications:</strong><br />- Industry <br />- Building construction</p>n<p><br /><strong>Моunting:</strong> To the terminals of the contactor and it is additionally clamped to its frame through a pin</p>n<p><strong>Standard:</strong> EN60947-1; EN60947-4-1; LVD; EMC</p><p><strong>Technical characteristics of LT2-E:</strong><br />- Rated operating current: 0,10 up to 93А<br />- Rated operating voltage : up to 690V АС;50/60Hz<br />- Insulation voltage: >690V<br />- Impulse voltage withstand: 6000V<br />- Mechanical wear resistance (number of cycles): ≥10000000<br />- Electrical wear resistance (number of cycles): ≥1000000<br />- Ambient temperature: -10° to 65ºС<br />- Maximum altitude: up to 2000m</p>n<p><strong>Advantages:</strong><br />- Indication for protection activating<br />- Choice of protection restoration method<br />- Allows adjustment of the operation range<br />- Allows operation at higher frequency<br />- High reliability of the current parameters<br />- Increase the effectiveness and prolongs the term of operation.</p>n<p><strong>Functions:</strong><br />- For protection of induction motors from overload or overheat<br />- To prevent the motor from operation at unusual temperature conditions</p>n<p><strong>Applications:</strong><br />- Industry <br />- Building construction</p>n<p><br /><strong>Моunting:</strong> To the terminals of the contactor and it is additionally clamped to its frame through a pin</p>n<p><strong>Standard:</strong> EN60947-1; EN60947-4-1; LVD; EMC</p><p><strong>Technical characteristics of LT2-E:</strong><br />- Rated operating current: 0,10 up to 93А<br />- Rated operating voltage : up to 690V АС;50/60Hz<br />- Insulation voltage: >690V<br />- Impulse voltage withstand: 6000V<br />- Mechanical wear resistance (number of cycles): ≥10000000<br />- Electrical wear resistance (number of cycles): ≥1000000<br />- Ambient temperature: -10° to 65ºС<br />- Maximum altitude: up to 2000m</p>n<p><strong>Advantages:</strong><br />- Indication for protection activating<br />- Choice of protection restoration method<br />- Allows adjustment of the operation range<br />- Allows operation at higher frequency<br />- High reliability of the current parameters<br />- Increase the effectiveness and prolongs the term of operation.</p>n<p><strong>Functions:</strong><br />- For protection of induction motors from overload or overheat<br />- To prevent the motor from operation at unusual temperature conditions</p>n<p><strong>Applications:</strong><br />- Industry <br />- Building construction</p>n<p><br /><strong>Моunting:</strong> To the terminals of the contactor and it is additionally clamped to its frame through a pin</p>n<p><strong>Standard:</strong> EN60947-1; EN60947-4-1; LVD; EMC</p><p><strong>Technical characteristics of LT2-E:</strong><br />- Rated operating current: 0,10 up to 93А<br />- Rated operating voltage : up to 690V АС;50/60Hz<br />- Insulation voltage: >690V<br />- Impulse voltage withstand: 6000V<br />- Mechanical wear resistance (number of cycles): ≥10000000<br />- Electrical wear resistance (number of cycles): ≥1000000<br />- Ambient temperature: -10° to 65ºС<br />- Maximum altitude: up to 2000m</p>n<p><strong>Advantages:</strong><br />- Indication for protection activating<br />- Choice of protection restoration method<br />- Allows adjustment of the operation range<br />- Allows operation at higher frequency<br />- High reliability of the current parameters<br />- Increase the effectiveness and prolongs the term of operation.</p>n<p><strong>Functions:</strong><br />- For protection of induction motors from overload or overheat<br />- To prevent the motor from operation at unusual temperature conditions</p>n<p><strong>Applications:</strong><br />- Industry <br />- Building construction</p>n<p><br /><strong>Моunting:</strong> To the terminals of the contactor and it is additionally clamped to its frame through a pin</p>n<p><strong>Standard:</strong> EN60947-1; EN60947-4-1; LVD; EMC</p><p><strong>Technical characteristics of LT2-E:</strong><br />- Rated operating current: 0,10 up to 93А<br />- Rated operating voltage : up to 690V АС;50/60Hz<br />- Insulation voltage: >690V<br />- Impulse voltage withstand: 6000V<br />- Mechanical wear resistance (number of cycles): ≥10000000<br />- Electrical wear resistance (number of cycles): ≥1000000<br />- Ambient temperature: -10° to 65ºС<br />- Maximum altitude: up to 2000m</p>n<p><strong>Advantages:</strong><br />- Indication for protection activating<br />- Choice of protection restoration method<br />- Allows adjustment of the operation range<br />- Allows operation at higher frequency<br />- High reliability of the current parameters<br />- Increase the effectiveness and prolongs the term of operation.</p>n<p><strong>Functions:</strong><br />- For protection of induction motors from overload or overheat<br />- To prevent the motor from operation at unusual temperature conditions</p>n<p><strong>Applications:</strong><br />- Industry <br />- Building construction</p>n<p><br /><strong>Моunting:</strong> To the terminals of the contactor and it is additionally clamped to its frame through a pin</p>n<p><strong>Standard:</strong> EN60947-1; EN60947-4-1; LVD; EMC</p><p><strong>Technical characteristics of LT2-E:</strong><br />- Rated operating current: 0,10 up to 93А<br />- Rated operating voltage : up to 690V АС;50/60Hz<br />- Insulation voltage: >690V<br />- Impulse voltage withstand: 6000V<br />- Mechanical wear resistance (number of cycles): ≥10000000<br />- Electrical wear resistance (number of cycles): ≥1000000<br />- Ambient temperature: -10° to 65ºС<br />- Maximum altitude: up to 2000m</p>n<p><strong>Advantages:</strong><br />- Indication for protection activating<br />- Choice of protection restoration method<br />- Allows adjustment of the operation range<br />- Allows operation at higher frequency<br />- High reliability of the current parameters<br />- Increase the effectiveness and prolongs the term of operation.</p>n<p><strong>Functions:</strong><br />- For protection of induction motors from overload or overheat<br />- To prevent the motor from operation at unusual temperature conditions</p>n<p><strong>Applications:</strong><br />- Industry <br />- Building construction</p>n<p><br /><strong>Моunting:</strong> To the terminals of the contactor and it is additionally clamped to its frame through a pin</p>n<p><strong>Standard:</strong> EN60947-1; EN60947-4-1; LVD; EMC</p><p><strong>Technical characteristics of LT2-E:</strong><br />- Rated operating current: 0,10 up to 93А<br />- Rated operating voltage : up to 690V АС;50/60Hz<br />- Insulation voltage: >690V<br />- Impulse voltage withstand: 6000V<br />- Mechanical wear resistance (number of cycles): ≥10000000<br />- Electrical wear resistance (number of cycles): ≥1000000<br />- Ambient temperature: -10° to 65ºС<br />- Maximum altitude: up to 2000m</p>n<p><strong>Advantages:</strong><br />- Indication for protection activating<br />- Choice of protection restoration method<br />- Allows adjustment of the operation range<br />- Allows operation at higher frequency<br />- High reliability of the current parameters<br />- Increase the effectiveness and prolongs the term of operation.</p>n<p><strong>Functions:</strong><br />- For protection of induction motors from overload or overheat<br />- To prevent the motor from operation at unusual temperature conditions</p>n<p><strong>Applications:</strong><br />- Industry <br />- Building construction</p>n<p><br /><strong>Моunting:</strong> To the terminals of the contactor and it is additionally clamped to its frame through a pin</p>n<p><strong>Standard:</strong> EN60947-1; EN60947-4-1; LVD; EMC</p><p><strong>Technical characteristics of LT2-E:</strong><br />- Rated operating current: 0,10 up to 93А<br />- Rated operating voltage : up to 690V АС;50/60Hz<br />- Insulation voltage: >690V<br />- Impulse voltage withstand: 6000V<br />- Mechanical wear resistance (number of cycles): ≥10000000<br />- Electrical wear resistance (number of cycles): ≥1000000<br />- Ambient temperature: -10° to 65ºС<br />- Maximum altitude: up to 2000m</p>n<p><strong>Advantages:</strong><br />- Indication for protection activating<br />- Choice of protection restoration method<br />- Allows adjustment of the operation range<br />- Allows operation at higher frequency<br />- High reliability of the current parameters<br />- Increase the effectiveness and prolongs the term of operation.</p>n<p><strong>Functions:</strong><br />- For protection of induction motors from overload or overheat<br />- To prevent the motor from operation at unusual temperature conditions</p>n<p><strong>Applications:</strong><br />- Industry <br />- Building construction</p>n<p><br /><strong>Моunting:</strong> To the terminals of the contactor and it is additionally clamped to its frame through a pin</p>n<p><strong>Standard:</strong> EN60947-1; EN60947-4-1; LVD; EMC</p><p><strong>Technical characteristics of LT2-E:</strong><br />- Rated operating current: 0,10 up to 93А<br />- Rated operating voltage : up to 690V АС;50/60Hz<br />- Insulation voltage: >690V<br />- Impulse voltage withstand: 6000V<br />- Mechanical wear resistance (number of cycles): ≥10000000<br />- Electrical wear resistance (number of cycles): ≥1000000<br />- Ambient temperature: -10° to 65ºС<br />- Maximum altitude: up to 2000m</p>n<p><strong>Advantages:</strong><br />- Indication for protection activating<br />- Choice of protection restoration method<br />- Allows adjustment of the operation range<br />- Allows operation at higher frequency<br />- High reliability of the current parameters<br />- Increase the effectiveness and prolongs the term of operation.</p>n<p><strong>Functions:</strong><br />- For protection of induction motors from overload or overheat<br />- To prevent the motor from operation at unusual temperature conditions</p>n<p><strong>Applications:</strong><br />- Industry <br />- Building construction</p>n<p><br /><strong>Моunting:</strong> To the terminals of the contactor and it is additionally clamped to its frame through a pin</p>n<p><strong>Standard:</strong> EN60947-1; EN60947-4-1; LVD; EMC</p><p><strong>Technical characteristics of LT2-E:</strong><br />- Rated operating current: 0,10 up to 93А<br />- Rated operating voltage : up to 690V АС;50/60Hz<br />- Insulation voltage: >690V<br />- Impulse voltage withstand: 6000V<br />- Mechanical wear resistance (number of cycles): ≥10000000<br />- Electrical wear resistance (number of cycles): ≥1000000<br />- Ambient temperature: -10° to 65ºС<br />- Maximum altitude: up to 2000m</p>n<p><strong>Advantages:</strong><br />- Indication for protection activating<br />- Choice of protection restoration method<br />- Allows adjustment of the operation range<br />- Allows operation at higher frequency<br />- High reliability of the current parameters<br />- Increase the effectiveness and prolongs the term of operation.</p>n<p><strong>Functions:</strong><br />- For protection of induction motors from overload or overheat<br />- To prevent the motor from operation at unusual temperature conditions</p>n<p><strong>Applications:</strong><br />- Industry <br />- Building construction</p>n<p><br /><strong>Моunting:</strong> To the terminals of the contactor and it is additionally clamped to its frame through a pin</p>n<p><strong>Standard:</strong> EN60947-1; EN60947-4-1; LVD; EMC</p><p><strong>Technical characteristics of LT2-E:</strong><br />- Rated operating current: 0,10 up to 93А<br />- Rated operating voltage : up to 690V АС;50/60Hz<br />- Insulation voltage: >690V<br />- Impulse voltage withstand: 6000V<br />- Mechanical wear resistance (number of cycles): ≥10000000<br />- Electrical wear resistance (number of cycles): ≥1000000<br />- Ambient temperature: -10° to 65ºС<br />- Maximum altitude: up to 2000m</p>n<p><strong>Advantages:</strong><br />- Indication for protection activating<br />- Choice of protection restoration method<br />- Allows adjustment of the operation range<br />- Allows operation at higher frequency<br />- High reliability of the current parameters<br />- Increase the effectiveness and prolongs the term of operation.</p>n<p><strong>Functions:</strong><br />- For protection of induction motors from overload or overheat<br />- To prevent the motor from operation at unusual temperature conditions</p>n<p><strong>Applications:</strong><br />- Industry <br />- Building construction</p>n<p><br /><strong>Моunting:</strong> To the terminals of the contactor and it is additionally clamped to its frame through a pin</p>n<p><strong>Standard:</strong> EN60947-1; EN60947-4-1; LVD; EMC</p><p><strong>Technical characteristics of LT2-E:</strong><br />- Rated operating current: 0,10 up to 93А<br />- Rated operating voltage : up to 690V АС;50/60Hz<br />- Insulation voltage: >690V<br />- Impulse voltage withstand: 6000V<br />- Mechanical wear resistance (number of cycles): ≥10000000<br />- Electrical wear resistance (number of cycles): ≥1000000<br />- Ambient temperature: -10° to 65ºС<br />- Maximum altitude: up to 2000m</p>n<p><strong>Advantages:</strong><br />- Indication for protection activating<br />- Choice of protection restoration method<br />- Allows adjustment of the operation range<br />- Allows operation at higher frequency<br />- High reliability of the current parameters<br />- Increase the effectiveness and prolongs the term of operation.</p>n<p><strong>Functions:</strong><br />- For protection of induction motors from overload or overheat<br />- To prevent the motor from operation at unusual temperature conditions</p>n<p><strong>Applications:</strong><br />- Industry <br />- Building construction</p>n<p><br /><strong>Моunting:</strong> To the terminals of the contactor and it is additionally clamped to its frame through a pin</p>n<p><strong>Standard:</strong> EN60947-1; EN60947-4-1; LVD; EMC</p><p><strong>Technical characteristics of LT2-E:</strong><br />- Rated operating current: 0,10 up to 93А<br />- Rated operating voltage : up to 690V АС;50/60Hz<br />- Insulation voltage: >690V<br />- Impulse voltage withstand: 6000V<br />- Mechanical wear resistance (number of cycles): ≥10000000<br />- Electrical wear resistance (number of cycles): ≥1000000<br />- Ambient temperature: -10° to 65ºС<br />- Maximum altitude: up to 2000m</p>n<p><strong>Advantages:</strong><br />- Indication for protection activating<br />- Choice of protection restoration method<br />- Allows adjustment of the operation range<br />- Allows operation at higher frequency<br />- High reliability of the current parameters<br />- Increase the effectiveness and prolongs the term of operation.</p>n<p><strong>Functions:</strong><br />- For protection of induction motors from overload or overheat<br />- To prevent the motor from operation at unusual temperature conditions</p>n<p><strong>Applications:</strong><br />- Industry <br />- Building construction</p>n<p><br /><strong>Моunting:</strong> To the terminals of the contactor and it is additionally clamped to its frame through a pin</p>n<p><strong>Standard:</strong> EN60947-1; EN60947-4-1; LVD; EMC</p><p><strong>Technical characteristics of LT2-E:</strong><br />- Rated operating current: 0,10 up to 93А<br />- Rated operating voltage : up to 690V АС;50/60Hz<br />- Insulation voltage: >690V<br />- Impulse voltage withstand: 6000V<br />- Mechanical wear resistance (number of cycles): ≥10000000<br />- Electrical wear resistance (number of cycles): ≥1000000<br />- Ambient temperature: -10° to 65ºС<br />- Maximum altitude: up to 2000m</p>n<p><strong>Advantages:</strong><br />- Indication for protection activating<br />- Choice of protection restoration method<br />- Allows adjustment of the operation range<br />- Allows operation at higher frequency<br />- High reliability of the current parameters<br />- Increase the effectiveness and prolongs the term of operation.</p>n<p><strong>Functions:</strong><br />- For protection of induction motors from overload or overheat<br />- To prevent the motor from operation at unusual temperature conditions</p>n<p><strong>Applications:</strong><br />- Industry <br />- Building construction</p>n<p><br /><strong>Моunting:</strong> To the terminals of the contactor and it is additionally clamped to its frame through a pin</p>n<p><strong>Standard:</strong> EN60947-1; EN60947-4-1; LVD; EMC</p><p><strong>Technical characteristics of LT2-E:</strong><br />- Rated operating current: 0,10 up to 93А<br />- Rated operating voltage : up to 690V АС;50/60Hz<br />- Insulation voltage: >690V<br />- Impulse voltage withstand: 6000V<br />- Mechanical wear resistance (number of cycles): ≥10000000<br />- Electrical wear resistance (number of cycles): ≥1000000<br />- Ambient temperature: -10° to 65ºС<br />- Maximum altitude: up to 2000m</p>n<p><strong>Advantages:</strong><br />- Indication for protection activating<br />- Choice of protection restoration method<br />- Allows adjustment of the operation range<br />- Allows operation at higher frequency<br />- High reliability of the current parameters<br />- Increase the effectiveness and prolongs the term of operation.</p>n<p><strong>Functions:</strong><br />- For protection of induction motors from overload or overheat<br />- To prevent the motor from operation at unusual temperature conditions</p>n<p><strong>Applications:</strong><br />- Industry <br />- Building construction</p>n<p><br /><strong>Моunting:</strong> To the terminals of the contactor and it is additionally clamped to its frame through a pin</p>n<p><strong>Standard:</strong> EN60947-1; EN60947-4-1; LVD; EMC</p>
  • Gyártó
    ELMARK
    Beállítási tartomány
    80-93А
    Energiaosztály 2023-
    -
    Garancia
    5+2
    Gyártói cikkszám
    13365
    Névleges áram
    93A
    Névleges áramerősség (In)
    93A
    Súly
    0.490
    Típus
    LT2-E3365
    Vonalkód / EAN-kód
    3800131110015
    márka
    ELMARK
    Modell
    LТ2-Exx
    A mágneskapcsoló típusa
    D
    ELMARK elektronikai katalógus (2023)
    Letöltés
    ELMARK világítástechnikai katalógus (2024)
    Letöltés
    ELMARK világítástechnikai katalógus (2025)
    Letöltés
    Gyártó
    ELMARK
    Cikkszám
    13365